
Through the acquisition of different profiles it is possible to reconstruct the all shape of the object.
The profilometer developed by Loccioni Home is composed of a matrix camera and a laser. The camera evaluates the bending of the laser projected on the area under test. In this way it is possible to reconstruct the 3D image starting from a 2D image, through an algorithm of triangulation. The output of the sensor is the profile of the tested object.
The profile is evaluated by the software which extracts the dimensional information using the image processing technology and compares it to the acceptability limits, in order to give the result GOODor FAIL automatically.
-
| Resolution: 0,05mm
| Measurement uncertainty: ±0,05mm
| Complete independence from the environmental light conditions
| Gigabit Ethernet connection
Applications
Profilometry on belt

Profilometry on drum

-
| steel demaged
| clamp not properly inserted
| cutted lifter
Profilometry on tub

-
| the distance of the lip seal from the internal face of the A-bearing
| the distance between the lip seal and the plastic
| the planarity of the seal
Profilometry on silicone


-
| 2D system (cameras) is used to evaluate width and position
| 3D system (profilometer) is used to measure the height of the silicon strip





